Thursday, March 31, 2016

Is every double Ikat a Telia Rumal

Ikat is a yarn resist technique wherein the yarns are tie-dyed, and on weaving a pattern is created on the surface of the fabric.

In single Ikat fabrics, either warp or weft is tie-dyed and woven with the other thread ( weft or warp) of solid color. In double Ikat, both warp and weft are tie-dyed according to a pre-determined pattern and then woven to create design on the fabric.

Double Ikat


Telia Rumal traditionally woven in Chirala, is originally a square constructed. However now the fabrics, or sarees are woven in this construction. A Telia -as it called today- is a double ikat construction with a typical color and design pattern.



The typical colors of Telias are Terracota red and black using natural dyes. The fabrics are mordanted with iron solution and alum so that on dyeing with alizarine, areas with iron become deep black and the ones with alum turned red.

As far as design is concerned, the layout of typical Telia comprise of a geometrical grid like patterning with borders all around, thereby creating small squares at the four corners.

There is also a confusion between Pochampally Ikat and Telia. Pochampally is a commercial application of Telia Rumal technique as well as patola technique of Gujarat. They use single, double or combined ikat techniques to produce sarees and fabric which are cost effective and popular.

Source

Buy my books at Amazon.com

Wednesday, March 30, 2016

Perspectives on Anthropometry in Garment Pattern Making



Perspectives on Anthropometry in Garment Pattern Making



R.S.BALAKUMAR M.A. (SOCIOLOGY ), M.L.M.(Labour Management), MBA (EXECUTIVE) in (FASHION-TECH), MISTE., Chennai, India Cell: +91-9283182955 Email: rsbalakumar1953@gmail.com
The skeletal structure: The student of garment and fashion industry
should posses a good working knowledge of the parts

Latest Dry Washing Techniques in Denim Garments (Part-1)



Latest Dry Washing Techniques in Denim Garments (Part-1)


Asma Akhi Dept. of Textile Engineering Bangladesh University of Business & Technology
Introduction Denim garment (Jeans) washing or denim washing
is one of the most widely used finishing treatments that have vast
usage, due to its effects on appearance and comfort. Without washing,
the denim garment is uncomfortable to wear, due

Indian Traditional Embroidery- How to Recognise-2

West India

Continued from Part-1


1. Gujarat Kutchh

Abla Bharat

Mochi Bharat

Soof Bharat

2. Parasi




Central India

1. Chikankari- Uttar Pradesh


2. Phoolpatti- Uttar Pradesh



3. Zardozi- Uttar Pradesh





South India

1. Kasuti- Karnataka




2. Lambani



East India

1. Kantha- West Bengal





2. Sujani- Bihar


3. Pipli Applique- Orissa



Buy my books at Amazon.com

Monday, March 28, 2016

Overview of Khadi Industry in India



OVERVIEW OF THE KHADI INDUSTRY OF INDIA




R.S.BALAKUMAR
M.A. (SOCIOLOGY ), M.L.M.(Labour Management),
MBA (EXECUTIVE) in (FASHION-TECH), MISTE., Chennai, India
Cell: +91-9283182955
Email: rsbalakumar1953@gmail.com



Introduction:
The Indian heritage of khadi is only a cloth woven by hand using hand spun yarn only. Natural fiber’s like cotton, wool and

Career in Fashion Designing in Indian Fashion Industry



CAREER OPPORTUNITIES FOR THE FASHION DESIGNERS IN INDIA


Velma Gray
Founder, http://olwomen.com
Email: grayvelma3@gmail.com 



INTRODUCTION:

Pursuing
a specific career all depends on the type of education you have taken,
your interests, your experience and the passion to do something
fruitful. It is all in your will-power and how you want to mold your
life. Life is to live and

Sunday, March 27, 2016

Analyzing the Effect of Mechanical Properties on Chicken Feather Reinforced Polypropylene Composites



ANALYZING THE EFFECT OF MECHANICAL PROPERTIES ON CHICKEN FEATHER REINFORCED POLYPROPYLENE COMPOSITES



Dhanalakshmi .S, Assistant Professor, Department of Fashion Technology, Rajas International Institute of Technology for Women, Nagercoil.Email: dhanamrsk@gmail.com
Abstract: 

Composite materials
are light weight, high strength to weight ratio and stiffness
properties and these

Saturday, March 26, 2016

What are Dhalapathar Sarees

Dhalapathar sarees are woven in the Dhalapathar in Khurda district of Orissa. These are woven by Rangani community in the village.

Dhalapathar Saree
Source:http://www.parisera.com/


These are also known as Kusumi Kapta, Kankana Pedi, Muktapunji, Nahati and Akata.

The yarn is cotton and they are woven in 20s to 2/120s count. Sizing is done only when 20s or 26s yarn in used. With mercerised yarn, no sizing is required. It is woven in fly shuttle pit looms. Ground weave is plain. Cotton healds are used for each warp.

Figuring is done with extra warp. For that flat rectangular wooden pieces called "Chiaris" are used. However now frame looms and Jalas are also used. The designing is done using weft rib of either 4 up 1 down or 6 up one down.

The dyeing is done using synthetic dyes.

For more details please refer to this source. and this one.



Buy my books at Amazon.com

Friday, March 18, 2016

ERP Software for Textile and Apparel Industry



[Sponsored]

What is ERP Software?


ERP i.e. Enterprise Resource Planning is a revolutionary concept in the modern textile and readymade garments industry.
The using of ERP software is increasing day by day due to its higher
rated output. Today’s most of the factories are used this kinds of
software.




Application of ERP Software:
ERP software has considerably used in the following

Thursday, March 17, 2016

Zardozi Embroidery - A System Approach



Zardozi Embroidery - A System Approach



R.S.BALAKUMAR M.A. (SOCIOLOGY ), M.L.M.(Labour Management), MBA (EXECUTIVE) in (FASHION-TECH), MISTE., Chennai, India Cell: +91-9283182955 Email: rsbalakumar1953@gmail.com
Introduction:Zardozi embroidery
is splendid metal embroidery, or called as the surface ornamentation.
To embellish the whole costumes of the Kings and the royals in India,

Wednesday, March 16, 2016

Career Opportunities for the Fashion Designers in India



Career Opportunities of Fashion Designing in India



R.S.BALAKUMAR M.A. (SOCIOLOGY ), M.L.M.(Labour Management), MBA (EXECUTIVE) in (FASHION-TECH), MISTE., Chennai, India Cell: +91-9283182955 Email: rsbalakumar1953@gmail.com
Introduction: Fashion designing
is a creative field that involves creative, innovative ideas and
designing. A fashion designer creates garments, textiles,

Saturday, March 12, 2016

Indian Traditional Embroidery - How to Recognise-1

A Structure of Traditional Embroidery in India:

The CBSE book on Indian traditional Textile has enumerated a structure to study Indian Traditional Embroidery. I am reproducing briefly the structure

North India

1. Kashida- Kashmir
2. Phulkari- Punjab
3. Chamba Rumal- Himachal Pradesh

West India
1. Gujarat Kutchh
2. Parasi

Central India

1. Chikankari- Uttar Pradesh
2. Phoolpatti- Uttar Pradesh
3. Zardozi- Uttar Pradesh

South India

1. Kasuti- Karnataka
2. Lambani

East India

1. Kantha- West Bengal
2. Sujani- Bihar
3. Pipli Applique- Orissa

The basic Takeaways from this book are as follows:

1. Kashidakari

- Practiced by Mensfolk
- Main stitches are darning stitch, stem stitch, satin stitch and chain stitch

There are three styles of Kashidakari

a. Sozni- Use fly stitch, stem stitch and darning stitch



b. Aari Style- This is also called Zalakdozi



c. Kashmiri Couching


Phulkari

The base material is khadi dyed in darker colors. Soft untwisted "Pat" silk is used for embroidery.

Basic stitch is darning stitch, done from the reverse side of the fabric. Outlining stem, chain and herringbone stitches are used.

One motif is left unembroidered or done in off color to ward of evil. This is called Nazarbuti.

There are two styles of embroidery:
a. Bagh- fully embroidered wrap- used on special occasion.
b. Phulkari- lightly embroidered- Daily use.''

Chamba Rumal

The base is either light mull or heavy Khaddar.
Embroidery is done using dyed, untwisted silk threads called "Pat"
Uses double satin stitch. Produces reversible fabric.


Will continue...

Buy my books at Amazon.com
Source

Saturday, March 5, 2016

Drawing and Labeling Different Parts of Loom



Draw & Labeling Different Parts of Loom



Meftaul Ferdous Lecturer, Dept. of Textile Engineering Islami Bank Institute of Technology Email: tex.e.ferdous@gmail.com
Introduction: 

Loom
is a machine which used to form woven fabric. A loom contains different
parts. Every part has individual function. There I discuses the
function different parts of loom with figure.
Cross section

Wednesday, March 2, 2016

Corn Fiber: A New Fiber on Horizon (Part-2)



Corn Fiber: A New Fiber on Horizon (Part-2)



Aditi Dhama
Satyam Fashion Institute, Noida, Delhi, India
Email: aaditidhama@gmail.com

Previous Part


MANUFACTURING PROCESS OF CORN FIBER
First
step is the process of separating starch from the bio-mass basically
wet milling is the process adopted. The starch is processed into
dextrose that is then converted to lactic acid using a

Tuesday, March 1, 2016

Determination of the Yarn Count by Wrap Reel & Analytical Balance



Determination of the Count by Wrap Reel & Analytical Balance





Meftaul Ferdous
Lecturer, Dept. of Textile Engineering
Islami Bank Institute of Technology
Email: tex.e.ferdous@gmail.com 





Experiment Name:
Determination the yarn count of a given cotton sample by wrap reel & analytical balance.

Theory:
Yarn count: The yarn count is a numerical